| 品牌 |
产品编号 |
品名 |
参数 |
价格/规格 |
| 甄准 |
MS-10010 |
KIT-6 |
孔径：3-7nm；比表面积：≥600m2/g 孔体积: 0.5-1.5 cm³/g |
400/1g；1100/5g；2160/10g |
| 进口原装 |
MS-20010 |
KIT-6 |
Preparation Method: Hydrothermal Method; BET Surface Area (m2/g) 600-800; Comparative Crystallinity (%) ≥90; Total Adsorption Average Pore Width (nm) 4.3; BJH Adsorption Average Pore Width (nm) 6.2; Phase Cubic Ia3d Silica; Particle Size 10-100μm |
9120/20g |
| 甄准 |
MS-10020 |
MCM-41 |
BET比表面积：≥800m2/g；孔容：0.9-1.25 cm3/g；Na2O%：≤0.05；灼减%：≤10；孔径nm：3-5；粒径：200nm-1μm |
1000/20g；2200/50g；
4000/100g；12000/500g |
| 进口原装 |
MS-20020 |
MCM-41 |
Grade: Reagent grade; Appearance: White Powder; Particle Size: 100-1000nm; Average Pore Diameter: 3.4nm; BET surface area (m2/g): >850; Pore Volume(cm3/g): ≥0.75; Na2O: ≤0.5% |
4320/20g |
| 进口原装 |
MS-20030 |
MCM-41 |
Grade: Industrial grade; Appearance: White Powder; Particle Size: 200-1000nm; Average Pore Diameter: 3.5-4.0nm; BET surface area(m2/g): >800; Pore Volume(cm3/g): ≥0.75; Na2O: ≤0.5% |
8160/50g；12720/100g |
| 甄准 |
MS-10030 |
SBA-15 |
孔径：6-11 nm；BET比表面积：550-600 m2/g；SiO2/Al2O3 ≥500mol；Na2O ≤0.01%；灼减 ≤5% |
600/10g；1000/20g；4500/100g |
| 进口原装 |
MS-20040 |
SBA-15 |
Preparation Method: Hydrothermal Method; Particle Size (μm): 1-4; Pore Diameter (nm): 6-11; Pore Volume (cm3/g): 1.46; BET surface area (m2/g): ≥550; Phase: p6mm; Comparative Crystallinity (%): ≥90; BJH Desorption Cumulative Volume of Pores (cm3/g): 0.6793; Bulk Density (g/cm3): 0.067; Tap Density (g/cm3): 0.145; Na2O (%): ≤0.1 |
4680/10g；6840/20g |
| 进口原装 |
MS-20050 |
SBA-16 |
Preparation Method: Hydrothermal Method; BET Surface Area (m2/g): 700-900; Average Pore Diameter (nm): 3.0-5.0; Particle Size (μm): 50-120; BJH Desorption Cumulative Volume of Pores (cm3/g): ~1.2; Phase: Im3m; Na2O (%): <0.1 |
4920/10g；7920/20g |
| 甄准 |
MS-10040 |
TS-1 |
比表面积：350-450 m2/g；孔径：0.56-0.58nm；结晶度：>95%；粒径：100-300 nm；Na2O：<0.1wt%; Si/Ti：~30 |
800/20g；1900/50g；
3600/100g；10000/1kg |
| 进口原装 |
MS-20060 |
TS-1 |
Titanium Silicalite-1; Preparation Method: Hydrothermal Method; SiO2/TiO2 Molar Ratio: ≥25; Particle Size (μm): 20-50; Pore Diameter (nm): ~0.5; BET surface area (m2/g): 360-420; Comparative Crystallinity (%): >95; Na2O (%): <0.1 |
4440/50g；11280/200g；
19600/1kg |
| 甄准 |
MS-10050 |
SAPO-34 |
形态：白色粉末；比表面积：≥550 m2/g；孔容：≥0.27 cm3/g；氧化钠含量：≤0.1% |
1000/100g；4700/500g |
| 进口原装 |
MS-20070 |
SAPO-34 |
Appearance: White Powder; Specific Surface Area (m2/g) ≥550; Pore Volume (cm3/g) ≥0.27; Average Particle Size (μm) ~2; SiO2/Al2O3 Molar Ratio: ~0.5; SiO2 (wt%): ~10; Al2O3 (wt%): ~42; Na2O(wt%): ≤0.1; Cation: H |
5760/100g；35640/1kg |
| 甄准 |
MS-10060 |
SAPO-11 |
比表面积：~80m2/g；孔体积：0.27m2/g |
1000/100g；4700/500g；
9000/1kg |
| 进口原装 |
MS-20080 |
SAPO-11 |
Appearance: White Powder; Specific Surface Area (m2/g): ≥180; Pore Volume (cm3/g): ≥0.16; SiO2(%): ~6; Al2O3 (%): ~48; Na2O (%): 0.2 |
5760/100g；35640/1kg |
| 甄准 |
MS-10070 |
ZSM-5 |
硅铝比:38；比表面积：330-400 m2/g；相对结晶度：≥ 95%；孔径：0.53-0.58 nm；粒径：<10μm；Na2O：<0.08 wt%；堆积密度：0.68 g/cm3 |
400/100g；800/500g |
| 甄准 |
MS-10071 |
ZSM-5 |
硅铝比:70；比表面积：330-400 m2/g；相对结晶度：≥ 95%；孔径：0.53-0.58 nm；粒径：<10μm；Na2O：<0.08 wt%；堆积密度：0.68 g/cm3 |
400/100g；800/500g |
| 甄准 |
MS-10072 |
ZSM-5 |
硅铝比:170；比表面积：330-400 m2/g；相对结晶度：≥ 95%；孔径：0.53-0.58 nm；粒径：<10μm；Na2O：<0.08 wt%；堆积密度：0.68 g/cm3 |
400/100g；800/500g |
| 甄准 |
MS-10073 |
ZSM-5 |
硅铝比:350-400；比表面积：330-400 m2/g；相对结晶度：≥ 95%；孔径：0.53-0.58 nm；粒径：<10μm；Na2O：<0.08 wt%；堆积密度：0.68 g/cm3 |
400/100g；800/500g |
| 甄准 |
MS-10074 |
ZSM-5 |
硅铝比:500；比表面积：330-400 m2/g；相对结晶度：≥ 95%；孔径：0.53-0.58 nm；粒径：<10μm；Na2O：<0.08 wt%；堆积密度：0.68 g/cm3 |
400/100g；800/500g |
| 进口原装 |
MS-20090 |
Nano ZSM-5 |
SiO2/Al2O3 Molar Ratio: 26; Na: <0.1%; Crystal Size(nm): 300; H2O(%wt): <5; BET (m2/g): 362; Relative Crystallization: 100%; Shape: Sphere; Pore Size: ~5Å |
4080/200g；12360/1kg |
| 进口原装 |
MS-20091 |
Nano ZSM-5 |
SiO2/Al2O3 Molar Ratio: 52; Na: <0.1%; Crystal Size(nm): 300; H2O(%wt): <5; BET (m2/g): 362; Relative Crystallization: 98%; Shape: Sphere; Pore Size: ~5Å |
4080/200g；12360/1kg |
| 进口原装 |
MS-20092 |
Nano ZSM-5 |
SiO2/Al2O3 Molar Ratio: 87; Na: <0.1%; Crystal Size(nm): 300; H2O(%wt): <5; BET (m2/g): 362; Relative Crystallization: 100%; Shape: Sphere; Pore Size: ~5Å |
4080/200g；12360/1kg |
| 进口原装 |
MS-20093 |
Nano ZSM-5 |
SiO2/Al2O3 Molar Ratio: 91; Na: <0.1%; Crystal Size(nm): 300; H2O(%wt): <5; BET; m2/g): 362; Relative Crystallization: 99%; Shape: Sphere; Pore Size: ~5Å |
4080/200g；12360/1kg |
| 进口原装 |
MS-20094 |
Nano ZSM-5 |
SiO2/Al2O3 Molar Ratio: 371; Na: <0.1%; Crystal Size(nm): 300; H2O(%wt): <5; BET (m2/g): 362; Relative Crystallization: 96%; Shape: Sphere; Pore Size: ~5Å |
4080/200g；12360/1kg |
| 进口原装 |
MS-20100 |
ZSM-5 Series Zeolite Powder |
Preparation Method: Hydrothermal Method; Linear Formula: (SiO2)x(Al2O3)y; Pore Size: ~5A; Form: H+; SiO2/Al2O3 Molar Ratio: ~38; Average Particle Size: 2μm; BET Surface Area m2/g: >380; Na2O: <0.2; Adsorption: ≥9.5 |
2640/100g；3600/200g；
8040/1kg |
| 进口原装 |
MS-20101 |
ZSM-5 Series Zeolite Powder |
Preparation Method: Hydrothermal Method; Linear Formula: (SiO2)x(Al2O3)y; Pore Size: ~5A; Form: H+; SiO2/Al2O3 Molar Ratio: ~117; Average Particle Size: 2μm; BET Surface Area m2/g: >380; Na2O: <0.2; Adsorption: ≥9.5 |
4080/100g；4680/200g；
10200/1kg |
| 进口原装 |
MS-20102 |
ZSM-5 Series Zeolite Powder |
Preparation Method: Hydrothermal Method; Linear Formula: (SiO2)x(Al2O3)y; Pore Size: ~5A; Form: H+; SiO2/Al2O3 Molar Ratio: 360; Average Particle Size: 2μm; BET Surface Area m2/g: >380; Na2O: <0.1; Adsorption: ≥9.5 |
4080/100g；4680/200g；
10200/1kg |
| 进口原装 |
MS-20110 |
ZSM-5 Adsorbent Series |
ZSM-5 Adsorbent: Hydrophobic Zeolite Adsorbent; Preparation Method: Hydrothermal Method; SiO2/Al2O3 Molar Ratio: 300; BET Surface Area (m2/g): ≥220; Bulk Density (g/ml): ~0.68; Na2O (%): ≤0.2; Comparative Crystallinity (%): ≥90; Adsorption of Hexane W%: ≥7.2; Adsorption of Water W%: ≤2; Compressive Strength (N/mm2): ≥25; Shape: Granular D:2-3.0mm; Pore Size: ~5A |
9120/1kg |
| 进口原装 |
MS-20111 |
ZSM-5 Adsorbent Series |
ZSM-5 Adsorbent: Binder-free Hydrophobic Zeolite Adsorbent; Preparation Method: Hydrothermal Method; SiO2/Al2O3 Molar Ratio: 360; BET Surface Area (m2/g): ≥340; Bulk Density (g/ml): ~0.68; Na2O (%): ≤0.2; Comparative Crystallinity (%): ≥90; Adsorption of Hexane W%: ≥9.6; Adsorption of Water W%: ≤2; Compressive Strength (N/mm2): ≥40; Shape: Granular D:1-3mm; Pore Size: ~5A |
9120/1kg；36000/5kg |
| 进口原装 |
MS-20120 |
ZSM-5 Catalyst |
Hydrophobic ZSM-5 Catalyst in Proton form (H+); SiO2/Al2O3 Molar Ratio: 38; Shape: Column (pelletized); Dimension: Φ2×2-10mm; Pore Volume: ≥0.25ml/g; Bulk Density: ~0.72 kg/l; Specific Surface Area: ≥250m2/g; Crushing Strength: ≥98 N/cm2; Attrition: <1 wt.%; Pore Size: ~5A |
3840/200g；6720/1kg |
| 进口原装 |
MS-20130 |
Y-type Series Zeolites |
Y-RE2
Form: Powder; SiO2/Al2O3 Molar Ratio: >5; Diameter: N/A; Length: N/A; Unit Cell Size: <2.453 nm; Differential Thermal Analysis: ≥998 °C; BET Surface Area: ≥578 m2/g; Na2O: <1.5%; RE2O3: 1.5-2.5%; Particle Size Distribution D50: <6 μm; Loss on Ignition: <13 % |
3720/200g |
| 进口原装 |
MS-20131 |
Y-type Series Zeolites |
Y-RE2-Pe
Form: Pellet; SiO2/Al2O3 Molar Ratio: >5; Diameter: 2-3mm; Length: ~20cm; Unit Cell Size: <2.453 nm; Differential Thermal Analysis: ≥998 °C; BET Surface Area: ≥578 m2/g; Na2O: <1.5%; RE2O3: 1.5-2.5%; Particle Size Distribution D50: <6 μm; Loss on Ignition: <13 % |
3720/200g |
| 进口原装 |
MS-20132 |
Y-type Series Zeolites |
Y-RE16
Form: Powder; SiO2/Al2O3 Molar Ratio: >5; Diameter: N/A; Length: N/A; Unit Cell Size: <2.470 nm; Differential Thermal Analysis: ≥1000 °C; BET Surface Area: ≥620 m2/g; Na2O: <0.5%; RE2O3: ≥16%; Particle Size Distribution D50: <6 μm; Loss on Ignition: <13 % |
3720/200g |
| 进口原装 |
MS-20134 |
Y-type Series Zeolites |
Na-Y
Form: Powder; SiO2/Al2O3 Molar Ratio: >5; Diameter: N/A; Length: N/A; Unit Cell Size: 2.465-2.472 nm; Differential Thermal Analysis: N/A; BET Surface Area: ≥650 m2/g; Na2O: <13.0%; RE2O3: 0; Particle Size Distribution D50: <6 μm; Loss on Ignition: <15 % |
3720/200g |
| 进口原装 |
MS-20140 |
Ultrastable Y Zeolite |
Form: Powder; SiO2/Al2O3 Molar Ratio: >5; Unit Cell Size: 2.44 nm; Lattice Collapse Temperature: 1030 °C; BET Surface Area: 630 m2/g; Na2O: <1.2%; SO42-: 0.22wt%; Particle Size Distribution D50: ~6 μm; Loss on Ignition: 6 wt% |
5520/100g |
| 进口原装 |
MS-20150 |
ZSM-22 |
Preparation Method: Hydrothermal Method; Cation Hydrogen: H+; SiO2/Al2O3 Molar Ratio: 65-80; BET Surface Area: >180 m2/g; Comparative Crystallinity: >95%; Na2O: <500 ppm |
4200/20g；6480/50g |
| 甄准 |
MS-10090 |
ZSM-35 |
Pore Diameter: 0.5-0.6 nm; SiO2/Al2O3: ~20; SSA:~300m2/g; Na2O(wt%):<0.1 |
1000/20g；1900/50g；
3600/100g；10000/1kg |
| 进口原装 |
MS-20160 |
ZSM-35 |
Pore Diameter: 0.5-0.6 nm; SiO2/Al2O3: ~15; SSA:~300m2/g; Na2O(wt%):<0.1; Crystallinity: >95% |
3840/20g；6960/100g；
30000/1kg |
| 进口原装 |
MS-20161 |
ZSM-35 |
Pore Diameter: 0.5-0.6 nm; SiO2/Al2O3: ~20; SSA:~300m2/g; Na2O(wt%):<0.1; Crystallinity: >95% |
3840/20g；6960/100g；
30000/1kg |
| 进口原装 |
MS-20162 |
ZSM-35 |
Pore Diameter: 0.5-0.6 nm; SiO2/Al2O3: ~30; SSA:~300m2/g; Na2O(wt%):<0.1; Crystallinity: >95% |
3840/20g；6960/100g；
30000/1kg |
| 进口原装 |
MS-20163 |
ZSM-35 |
Pore Diameter: 0.5-0.6 nm; SiO2/Al2O3: ~50; SSA:~300m2/g; Na2O(wt%):<0.1; Crystallinity: >95% |
3840/20g |
| 甄准 |
MS-10100 |
Beta Zeolite |
Pore Diameter: 0.55-0.70 nm; SiO2/Al2O3: ~40; SSA:~500m2/g; Na2O(wt%):<0.1; Grain size: 20-30nm (SEM) |
1100/20g；7000/500g；
10000/1kg |
| 进口原装 |
MS-20170 |
Beta Zeolite |
Pore Diameter: 0.55-0.70 nm; SiO2/Al2O3: ~40; SSA:~500m2/g; Na2O(wt%):<0.1; Crystallinity: >95%; Form: H+ |
4080/20g；8040/100g；
25560/1kg |
| 进口原装 |
MS-20180 |
FDU-12 |
Preparation Method: Hydrothermal Method; Form: Powder; Ave. Pore Diameter (nm): 10.0; BET Surface Area (m2/g): ~600; Entrance Size (nm): 3.8; Pore Volume (cm3/g): 0.66; Na2O (%): ≤1.0; Phase: f.c.c.; Particle Size (μm): 2-3 |
9120/20g |
| 进口原装 |
MS-20190 |
Monodisperse Mesoporous Silica Nanosphere Stellate MSN |
Preparation Method: soft chemistry; Average Size: 80 nm; Vtotal: ~1.4 mL/g; Pore Size (conical pores of the stellate MSNs): 2.9 nm; Pore Size (inter particle voids between the packed MSNs): 50 nm |
5640/5g |
| 进口原装 |
MS-20200 |
Acetate Deiodinase Adsorbent |
Shape: Sphere with diameter 0.5～0.8 mm; Strength ＞8 N ; Chemical Composition: Molar ratio of SiO2/Al2O3 = 10~20; Ag ＞7% ; Function After treatment with the adsorbent‚ the content of iodine in acetic acid can be reduced to lower than 10 ppb from ＞50 ppb in raw acetic acid; Life time: ＞300 d; Packed: Knitting bag inside lining plastic bag |
13920/1kg |
